||Add To Cart
Great Planes Goldberg Tiger 2 Kit .35-.45,61"
R/C Airplane Kits - Sport .40-.50
This is a radio controlled, glow powered, balsa and plywood
Carl Goldberg Tiger 2 .40 sport scale aerobatic airplane kit.
For beginner to intermediate modeler/fliers.
FEATURES: All Carl Goldberg kits include fuselage alignment devices and most
feature highly-refined interlocking lite ply contruction methods.
Wings: One piece covered balsa and plywood construction.
Radio compartment: Large built in balsa and ply radio tray.
Landing gear: Wire main and nose
Hardware: Complete hardware included
Motor Mount: Included adjustable engine mount
Warranty: Carl Goldgerg Products guarantees this kit defect-free
in both materials and workmanship at the date of purchase.
INCLUDES: All wood to construct airplane, pushrods, prebent wire aluminum main
landing gear, prebent nose wire, adjustable engine mount, horns,
decals, photo-illustrated instructions, full-size rolled plans.
REQUIRES: Engine: .35-.45 cu in (5.7-7.4 cc) 2-stroke
OR .40-.50 cu in (6.5-8.2 cc) 4-stroke
Radio: 4-channel miniumum required
Servos: 4-standard servos
(1-ailerons, 1-elevator, 1-rudder, 1-throttle)
Covering: Two 6-foot rolls of covering.
Misc. Items: Three 2¼" wheels, 2¼" spinner, 6-8oz fuel tank,
5/32" wheel collars, glow plug, ¼" foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment.
SPECS: Wingspan: 61" (1549mm)
Wing Area: 680 sq in (4387sq cm)
Weight: 4.75 - 5.25lb
Airfoil: Fully-symmetrical Low Wing
Center of Gravity: 3½"-4-5/8" (88.9-117mm)
back from the wing's leading edge at the fuselage sides.
Control Throws- control throws for rudder, elevator, and ailerons
are set off of included gauge in instruction manual.
Purchasers of Great Planes Goldberg Tiger 2 Kit .35-.45,61" also bought:
OmniModels - Home of FREE shipping, low prices and personal service
OmniModels. All rights reserved. Do not duplicate or redistribute in any form.