|
|
|
|
This is the 1/8 scale, Electric Powered, Radio Controlled,
EB-48 Buggy Kit from Tekno RC.
FEATURES: Chassis: CNC aluminum, 0.16" (4mm) thick, super narrow design-widest
point is 125mm, less than 5" from mudguard to mudguard, short
chassis overhang provides better bump handling and jump landing,
gun metal gray in color
Drive: Four wheel shaft, CV driveshafts with captured pins
Motor Mount: Two-piece CNC aluminum construction with dual clamping
gear mesh adjusment, lightweight direct to diff mount design
Differentials: Three lightweight fluid filled bevel gear type
Battery Tray: Sunken into chassis for super low center of gravity,
tray accomodates one 4S or two 2S LiPo packs
Shocks: 16mm big bore, oil filled, CNC threaded shock bodies, caps,
cartridge caps, and adjustment nuts, 4mm hardened steel polished
shafts, options for vented cap, emulsion, or standard shock
configurations
Shock Towers: 0.20" (5mm) thick CNC aluminum
Body: Clear polycarbonate buggy, with white plastic high-downforce
wing
Suspension: Adjustable front arm sweep and angle, equal length front
and rear sway bars, adjustable length arms to suit any track
conditions,
Steering: Narrow pivot posts provide zero bump geometry with nearly
zero slop, CNC aluminum Ackerman plate rides on 4 precision
bearings, adjustable bump-steer and Ackerman, Ackerman describes
the effect of the inside front wheel turning faster than the
outside front wheel during turns, adjustable steering stops
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
INCLUDES: EB-48 Electric Buggy Kit with Body, Rear Wing, Motor Mount, Shocks,
Shock and Diff Oil, Decals and Instruction Manual
REQUIRES: Radio: 2-3 channel with high-speed steering servo (also, standard
servo if using brake)
Motor: Brushless type designed for 1/8 scale buggies
Pinion Gear: Mod 1, Tekno RC 11 - 30t recommended
LiPo Battery: One 4S or two 2S
Tires: 1/8 scale buggy
Wheels: 1/8 scale buggy
Battery Charger: For selected LiPo battery
Paint, tools and track equipment
SPECS: Buggy-
Length: 17.1" (435mm)
Wheelbase: 12.7-13.2" (323-335mm)
Width: 12" (306mm), 12.2" (310mm) with optional hubs
Weight: 7.5lbs (3400g) with common electronics & options
Diff Ratio: F/R 10/40t, Center 44t
Battery Tray Dimensions: 1.96 x 5.8" (50 x 148mm) 2x2s or 1x4s config
Body-
Length: 13" (330mm)
Width: 5" (127mm)
Height: 3.1" (80mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Ctr. Diff 1 DTXC1585
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 5x11mm Fr Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
2 13x19mm Rear Hubs 1 ARZC2636
2 8x16mm Rear Hubs 1 DTXC1585
2 13x19mm Front Hubs 1 ARZC2636
2 8x14mm Front Hubs 1 DTXC1583
4 5x8mm Steering 2 DTXC1523
jxs 09/12/12
ir/jxs
|
Purchasers of Tekno R/C 1/8 EB48 4WD Electric Buggy Kit also bought:
|
|
OmniModels - Home of FREE shipping, low prices and personal service
|
|
|
©
2013
OmniModels. All rights reserved. Do not duplicate or redistribute in any form.
|
|
Tekno R/C 1/8 EB48 4WD Electric Buggy Kit
